Ignition Transients of Large Segmented Solid Rocket Boosters

A model is described which provides a means for analyzing the complexities of ignition transients and pressure peaks of large, high performance, segmented solid rocket boosters. The method accounts for: (1) temporal and spatial development of the flow field set up by the head end igniter discharge, (2) ignition and flame spreading coupled to chamber flow, (3) the steep velocity, pressure, and temperature gradients that occur during the early phases of ignition, and (4) the interactions that produce ignition spikes (i.e., compression of chamber gases during pressurization, erosive burning, and mass added effect of igniter discharge). The technique differs from earlier models in that the flow interactions between the slots and main chamber are accounted for, and the original computer program for monolithic motors is improved. The procedures were used to predict the ignition transients of the current design for the space shuttle booster

The starting transient of solid propellant rocket motors with high internal gas velocities

A comprehensive analytical model which considers time and space development of the flow field in solid propellant rocket motors with high volumetric loading density is described. The gas dynamics in the motor chamber is governed by a set of hyperbolic partial differential equations, that are coupled with the ignition and flame spreading events, and with the axial variation of mass addition. The flame spreading rate is calculated by successive heating-to-ignition along the propellant surface. Experimental diagnostic studies have been performed with a rectangular window motor (50 cm grain length, 5 cm burning perimeter and 1 cm hydraulic port diameter), using a controllable head-end gaseous igniter. Tests were conducted with AP composite propellant at port-to-throat area ratios of 2.0, 1.5, 1.2, and 1.06, and head-end pressures from 35 to 70 atm. Calculated pressure transients and flame spreading rates are in very good agreement with those measured in the experimental system

Hermitian quark mass matrices with four texture zeros

We provide a complete and systematic analysis of hermitian, hierarchical quark mass matrices with four texture zeros. Using triangular mass matrices, each pattern of texture zeros is readily shown to lead to a definite relation between the CKM parameters and the quark masses. Nineteen pairs are found to be consistent with present data, and one other is marginally acceptable. In particular, no parallel structure between the up and down mass matrices is found to be favorable with data.Comment: 18 pages, no figure, references [8] and [10] adde

Electromagnetic energy and energy flows in photonic crystals made of arrays of parallel dielectric cylinders

We consider the electromagnetic propagation in two-dimensional photonic crystals, formed by parallel dielectric cylinders embedded a uniform medium. The frequency band structure is computed using the standard plane-wave expansion method, and the corresponding eigne-modes are obtained subsequently. The optical flows of the eigen-modes are calculated by a direct computation approach, and several averaging schemes of the energy current are discussed. The results are compared to those obtained by the usual approach that employs the group velocity calculation. We consider both the case in which the frequency lies within passing band and the situation in which the frequency is in the range of a partial bandgap. The agreements and discrepancies between various averaging schemes and the group velocity approach are discussed in detail. The results indicate the group velocity can be obtained by appropriate averaging method.Comment: 23 pages, 5 figure

Measurement of opaque film thickness

The theoretical and experimental framework for thickness measurements of thin metal films by low frequency thermal waves is described. Although it is assumed that the films are opaque and the substrates are comparatively poor thermal conductors, the theory is easily extended to other cases of technological interest. A brief description is given of the thermal waves and the experimental arrangement and parameters. The usefulness of the technique is illustrated for making absolute measurements of the thermal diffusivities of isotropic substrate materials. This measurement on pure elemental solids provides a check on the three dimensional theory in the limiting case of zero film thickness. The theoretical framework is then presented, along with numerical calculations and corresponding experimental results for the case of copper films on a glass substrate

Lorentz transformation and vector field flows

The parameter changes resulting from a combination of Lorentz transformation are shown to form vector field flows. The exact, finite Thomas rotation angle is determined and interpreted intuitively. Using phase portraits, the parameters evolution can be clearly visualized. In addition to identifying the fixed points, we obtain an analytic invariant, which correlates the evolution of parameters.Comment: 11 pages, 3 figures. Section IV revised and title change

Solar Neutrinos with Three Flavor Mixings

The recent 71Ga solar neutrino observation is combined with the 37Cl and Kamiokande-II observations in an analysis for neutrino masses and mixings. The allowed parameter region is found for matter enhanced mixings among all three neutrino flavors. Distortions of the solar neutrino spectrum unique to three flavors are possible and may be observed in continuing and next generation experiments.Comment: August 1992 (Revised) PURD-TH-92-

HR practice, organisational commitment & citizenship behaviour in Taiwan

Purpose (mandatory) The study examines the relationships between HR practice (four aspects), organisational commitment and citizenship behaviour at primary schools in Taiwan. The four HR aspects include: (1) recruitment and placement (RP), (2) teaching, education and career development (TEC), (3) support, communication and retention (SCR), and (4) performance and appraisal (PA). Design/methodology/approach (mandatory) With the assistance from the school HR managers and using an anti-common method variance strategy, research data from 568 incumbent teachers in Taiwan are collected, analysed and evaluated. Findings (mandatory) Different from prior studies, highlighting the merits of HR practice, the study discovers that HR practice may not necessarily contribute to citizenship behaviour. Teachers with positive perceptions of RP and TEC are more likely to demonstrate citizenship behaviour, whereas teachers with positive perceptions of SCR and PA are not. In addition, the study finds three moderators: affective organisational commitment (AOC), rank of positions, and campus size. The analysis shows that teachers with more AOC, higher positions and from smaller campus are more likely to demonstrate OCB. Originality/value (mandatory) The study provides a closer look at the HR-OCB relationship in Taiwan. It reveals that a positive perception of HR practice may not necessarily contribute to OCB occurrence. In addition, the results indicate that teachers have different views about varying HR aspects. Specifically, aspects of recruitment and placement and teaching, education and career development receive relatively higher levels of positive perception, whereas aspects of SCR and PA receive relatively lower levels of positive perception. Questions arise as to whether HR practice may lead to more OCB at primary schools. If this statement is true, school managers shall think further of how to promote OCB using other policies, rather than relying on the HR practice investigated here